Posts Tagged ‘and Interior Design’

Best Interiors

This simple method lets you use a small amount of tinted paints perform drawing (ornament) on the perimeter of the ceiling. Color Shape figure are chosen so as prompts a fantasy – of course, in accordance with style and character rooms or apartments. Patterns are conveniently applied with stencils. Ceiling surface must be pre completely renovated, painted in the general tone and dried. Drawings, applied by Stencils can be simple or complex, a single color or multicolored. Stencils are made of thick paper or thin cardboard (to get a clear picture material must be sufficiently dense).

Paper or cardboard cut into pieces the size you want, then draw on them the elements of the pattern and cut out the stencil with a sharp knife. If necessary (if required by design) in some detail is left thin bridges (bridges). If a figure expected to make a multi-colored, for each color components must perform a separate stencil. And to translate the image from the original template or change the image in proportion, in accordance with the desired size, you can use a very simple method, which is known to artists for several centuries. On the paper portrayed the right image, which is completely square. Then the entire picture needed divided into cells, where each box will be a small piece of the picture. Then on another sheet of paper to draw a box the right size, which is divided into as many squares as the previous one. After this outline of the picture in fragments carefully transferred onto the sheet, thereby obtaining an increase (or decrease) of the image.

Particleboard – Cutting And Application

Particleboard (Chipboard) – a high-quality and environmentally friendly material that is widely known and actively used because of its high strength, ease in handling. Particleboard is made from various waste woody plants: cleaned and dried pine or birch sawdust. Sawdust are pressed and glued together with thermosetting adhesive. Chipboard is divided by water resistance: Particleboard with the usual moisture resistant chipboard and with increased resistance to water (used in the manufacture of bathroom furniture, kitchen sets). ADI differs in density: low density – up to 550 kg / cu m, the average density – 550-750 kg / cubic meter, a high – density of 750 kg / cu.m. Particleboard is used in construction, manufacturing of furniture, countertops, kitchen furniture, furniture for office, schools and kindergartens. Particleboard is also used for wall cladding and roofing, as wall panels for the manufacture of floors, building fences, as well as for decoration. To give the appearance of the ADI to grind, and then the veneer melamine, laminate, veneer or varnish (matt or glossy).

After the veneer chipboard can be almost any color, however, the most popular are lining that mimic the structure of wood. Exposed, but only polished plate is used for manufacture of hidden items, such as the various decks. Of great importance for good appearance has a quality sawn wood laminate. The first stage of the production of furniture made of chipboard – her section at the appropriate parts and components. Directly on the quality of cut chipboard will depend on the appearance and durability of the future of furniture. Correct sawing very hard to produce conventional instruments, this requires special equipment.

Current production is used for cutting a vertical panel saw. This machine has a compact design, reliable and easy to use. A modern machine can produce the following types of cuts: vertical and horizontal propyl, edged propyl, propyl-format, as well as cut internal openings. Professional sawing chipboard is available for purchase or apply to specialized companies. When preparation of solid particle board for furniture manufacturing, it can be subjected to different types of cutting. Straight-line sawing chipboard, which form a rectangular shape. Curvilinear sawing Particleboard, to create elements with curvilinear shapes (eg, details of design furniture). Mixed sawing chipboard, when you need detail, both direct and curved lines. If you decide to saw particle board in the home, then Prepare a sharp saw with fine teeth. Produce sawn should slowly and carefully, otherwise you may damage the DSP, getting chipped and uneven cut. If as a result of cut you get jagged edges, they must be handle-operated plane. As a result, cutting boards to bare the inner layer of particle board, it must be processed, for example, by using plastic strips or veneers. This procedure is called kromkovanie, it will protect the particleboard from moisture, mildew, give details of the finished appearance.

Archives